/
Questions/
Assignment/
When a full design specification was produced and the weighted objective procedure carried out: Engineering Design Assignment, TU, UK
Looking For Plagiarism Free Answers For Your UK College/ University Assignments.
BUY NOWWhen a full design specification was produced and the weighted objective procedure carried out: Engineering Design Assignment, TU, UK
University | Teesside University (TU) |
---|---|
Subject | Engineering Design |
SCENARIOS
Either
(a) Bicycle Rack
When a full design specification was produced and the weighted objective procedure carried out, it was found that a tow bar mounted rack was the best solution.
The rack is to bolt to the tow bar once the tow ball is removed. The dimensions of the tow bar bracket are shown in Figure 1. The 330 mm dimension refers to the distance from the ground to the bottom of the bracket.
In order to avoid the bikes fouling the car, it should be assumed that no part of either bike should protrude beyond the face of the tow bar bracket (ie between the bracket and the car).
The two bikes to be carried have dimensions shown in Figures 2 and 3. The width of the handlebars of the man’s bike is 420 mm, whilst that of the woman’s is 630 mm. The width across the pedals is 360 mm in both cases. Your good friend Fred has offered to help build the bike rack and he has access to the following materials and equipment:
- square section steel tubing, 25 mm × 25 mm × 2 mm thick
- steel plate, 8 mm thick
- steel strips, 25 mm wide by 6mm thick
- brazing and welding gear
- a powered hacksaw
- a pillar dril
Design a suitable rack that can be made using Fred’s materials and equipment. It is not necessary to worry about stresses: the materials are capable of exceeding the strength requirements of any design. In addition, the rack should be designed to ‘look right’.
As part of the report, you should produce:
(i) An arrangement drawing showing the outline of the bikes on the rack. This does not need to be very detailed or show any dimensions but should clearly demonstrate that the rack will enable the two bikes to be carried without fouling the car or the ground.
(ii) A detailed engineering drawing of the rack only, comprising front and side elevations with all dimensions required for manufacture shown.
OR
(b) Front Panel of Circuit Trainer
An analogue/digital circuit trainer is required for open-learning students to use to build circuits as part of their electrical/electronic practical work. The circuits to be built can consist of up to five integrated circuits and their associated discrete components.
Figures 4, 5 and 6 show block diagrams for each system of the intended design.
(i) A power supply consisting of:
• 240 V supply input
• power ‘on’ indicator
• +5 V output
• +12 V output
• –12 V output
• 0 to +12 V variable output
• 0 to –12 V variable output
• output short-circuit indicators for ‘+’ and ‘–’ supplies
(ii) A function generator capable of:
• generating sinusoidal, triangular, and square waveforms
• variable amplitude
• variable frequency
• frequencies in the ranges 0 to 100 Hz, 100 Hz to10 kHz and 10 kHz to 1 MHz
(iii) A multimeter capable of measuring:
• resistance
• voltage
• current
You will be required to draw a plan view of the front panel to show the mounting of the various controls, etc. A photograph of an example of an existing circuit trainer is given in Figure 7.
Buy Answer of This Assessment & Raise Your Grades
Get help by expert
UK students studying Engineering Design at Teesside University (TU) can now avail themselves of our top-notch Engineering Assignment Help services. Whether you’re working on a project where a full design specification needs to be produced or carrying out a weighted objective procedure, our expert team is here to provide you with the assistance you need. Our experienced writers are well-versed in engineering principles and will help you craft high-quality assignments that meet the requirements of your course. With our assignment help, you can overcome the challenges of complex engineering assignments and achieve academic success.
Recent solved questions
- CMI unit 701 strategic leadership, Essay, UK
- CIH Level 4: H409 - Research Skills for Housing, assignment, UK
- You are working for an energy company where you were asked to design a solution to promote sustainable transportation: Finding and Using Information, Assignment, OU, UK
- UNIT CMI 706: Designed to enable leaders to evidence their understanding of the scope, complexity and role of Finance within an organisational context: Finance for Strategic Leaders, Report, UK
- Managing a Professional Engineering Project (MPEP), Tutor Marked Assignment 1 (TMA) Network Analysis, TU, UK
- Unit 3: You are advising the owner of a local business that runs coach trips: Financial and Management Accounting Techniques for Managers, Assignment, UOS, UK
- UNIT CMI 702: Evidence Booklet: Understand the principles for leading and developing people: Leading and Developing People to Optimise Performance, Assignment, UK
- Level 4: Understanding the management role to improve management performance: Principles of leadership and management, Assignment, ILM, UK
- 7HR03: Your knowledge and understanding of the material covered in this specialist unit will be assessed: Strategic reward management, Assignment, CIPD Level 7, UK
- UNIT CMI 305 Assessment Booklet: The aim of this assessment booklet is to enable managers to evidence their understanding of how to use their knowledg: Building Stakeholder Relationships Using Effective Communication, Assignment, UK