- CIPD level 5HR02 Assignment: Talent Management and Workforce Planning Unit Guide
- Level 3 D/615/3823 Assignment: Regulation, Protection, and Collaborative Practice in Health and Social Care
- ILM Level 4 Assignment 01: Developing Leadership Styles: An Action Plan for Effective Leadership and Team Engagement
- Level 6 Unit T/615/2726 Assignment: Strategic Project Management: Identifying, Planning, and Controlling Projects for Business Success
- EDD-U1-T4 Assignment: Internal and External Support Services for Educational Practitioners
- Discussion Paper on Market Forces and Government Interventions for Business Leaders
- Unit 10 Customer Relationship Management Assignment – CRM Processes & Stakeholder Roles
- CIPD 7HR02 Resourcing and Talent Management to Sustain Success
- Athe Level 3 Health and Social Care Assessment Questions
- M/618/4168 Unit 2 Principles, Values and Regulation in the Health and Social Care Sector – ATHE Level 3
- ILM Communication Skills Self-Assessment
- ILM Unit 8600-309: Understand How to Establish an Effective Team
- CMI Unit 525 Using Reflective Practice to Inform Personal and Professional Development
- Understand and Work with a Wide Range of Stakeholders and Organisational Structures – Assignment 1
- Assessment: Financial Performance Evaluation of Savory Snacks Company Ltd for Credit
- CMI L5 Assignment: Managing Stakeholder Relationships: Strategies, Challenges, and Best Practices
- Level 3 Unit 2 Assignment: Principles, Values and Regulation in the Health and Social Care Sector
- COM4006 Assignment: Introduction to Academic Skills and Professional Development
- Assessment: Managing Organisational Change: Evaluating Strategies, Challenges, and Impact
- UNIT CMI 706 Assignment: Finance for Strategic Leaders: The Role, Scope, and Impact of Finance
When a full design specification was produced and the weighted objective procedure carried out: Engineering Design Assignment, TU, UK
| University | Teesside University (TU) |
| Subject | Engineering Design |
SCENARIOS
Either
(a) Bicycle Rack
When a full design specification was produced and the weighted objective procedure carried out, it was found that a tow bar mounted rack was the best solution.
The rack is to bolt to the tow bar once the tow ball is removed. The dimensions of the tow bar bracket are shown in Figure 1. The 330 mm dimension refers to the distance from the ground to the bottom of the bracket.
In order to avoid the bikes fouling the car, it should be assumed that no part of either bike should protrude beyond the face of the tow bar bracket (ie between the bracket and the car).
The two bikes to be carried have dimensions shown in Figures 2 and 3. The width of the handlebars of the man’s bike is 420 mm, whilst that of the woman’s is 630 mm. The width across the pedals is 360 mm in both cases. Your good friend Fred has offered to help build the bike rack and he has access to the following materials and equipment:
- square section steel tubing, 25 mm × 25 mm × 2 mm thick
- steel plate, 8 mm thick
- steel strips, 25 mm wide by 6mm thick
- brazing and welding gear
- a powered hacksaw
- a pillar dril
Design a suitable rack that can be made using Fred’s materials and equipment. It is not necessary to worry about stresses: the materials are capable of exceeding the strength requirements of any design. In addition, the rack should be designed to ‘look right’.
As part of the report, you should produce:
(i) An arrangement drawing showing the outline of the bikes on the rack. This does not need to be very detailed or show any dimensions but should clearly demonstrate that the rack will enable the two bikes to be carried without fouling the car or the ground.
(ii) A detailed engineering drawing of the rack only, comprising front and side elevations with all dimensions required for manufacture shown.
OR
(b) Front Panel of Circuit Trainer
An analogue/digital circuit trainer is required for open-learning students to use to build circuits as part of their electrical/electronic practical work. The circuits to be built can consist of up to five integrated circuits and their associated discrete components.
Figures 4, 5 and 6 show block diagrams for each system of the intended design.
(i) A power supply consisting of:
• 240 V supply input
• power ‘on’ indicator
• +5 V output
• +12 V output
• –12 V output
• 0 to +12 V variable output
• 0 to –12 V variable output
• output short-circuit indicators for ‘+’ and ‘–’ supplies
(ii) A function generator capable of:
• generating sinusoidal, triangular, and square waveforms
• variable amplitude
• variable frequency
• frequencies in the ranges 0 to 100 Hz, 100 Hz to10 kHz and 10 kHz to 1 MHz
(iii) A multimeter capable of measuring:
• resistance
• voltage
• current
You will be required to draw a plan view of the front panel to show the mounting of the various controls, etc. A photograph of an example of an existing circuit trainer is given in Figure 7.
Buy Answer of This Assessment & Raise Your Grades
UK students studying Engineering Design at Teesside University (TU) can now avail themselves of our top-notch Engineering Assignment Help services. Whether you’re working on a project where a full design specification needs to be produced or carrying out a weighted objective procedure, our expert team is here to provide you with the assistance you need. Our experienced writers are well-versed in engineering principles and will help you craft high-quality assignments that meet the requirements of your course. With our assignment help, you can overcome the challenges of complex engineering assignments and achieve academic success.
Answer
Do You Need Assignment of This Question
